50ton Hydraulic Molding Press Machine(two-stage type)
Hot press molding machines
This press machine produces two products in one cycle.
【Features】
1. It is possible to control the upper and lower mold temperatures by controlling each stage independently.
2.Designed in consideration of safety specifications by covering the entire machine from top to bottom with safety covers.
3.Since an inverter unit is used, there is less damage on the machine by providing a low-speed mode.
| Products(applications) | Parts for automobile |
| Output | 50ton |
| Stroke | 300㎜ |
| Open height | 420㎜（210+210㎜） |
| Platen size | 400x400㎜ |
| Cylinder | φ180㎜ |
| Maximum pressure | 19.2MPa |
| Operation speed | 3-100㎜/s |
| Hot platen temperature | 300℃ |
| Inverter motor power | 5KW |
| Heater capacity | 16KW（4KWｘ４） |
| Operation | Manual/Automatic |
| Machine size(widthxheightxdepth) | Approximately950x2000x1900㎜ |